YES I've written a simple G-code to test it though it's not needed as you are aware you can run commands from the MDI screen in mach3. nor did it have any spindle control setup because the controller had a manual on/off spindle switch and speed control, probably because a link cable was not fitted between the JP-382A axis control board and the JP 1482 spindle board, which I've now made. include the probe setup even though one was supplied. Ian.Mach3 software came with he cnc machine as a basic package, the mach3 setup instructions booklet that came with it did not. If Mach 3 is a problem for you.you are the problem. Running a simple G code program will get Mach3 to trouble shoot the point where you've made a mistake in your coding.ask me how I know.I'm still learning from the bottom. Have you tried writing a simple G code program with those M commands.in the correctįormat sequence.some people write sloppy code sequences and wonder why they get problems. Ahh, bullsh!t.somewhere the Mach 3 settings you've done are set up wrong.go back to the config menu and set it up again as if it's a new machine on Mach 3.if you still get a wrong response your controller probably is faulty.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |